Lead free solder comparison

by: Mirjam Visser, 2010-07-09 03:41:50 UTC
Sustainability Aspects: Lead free solder

Solder

The USA Environmental Protection Agency (EPA) as well the IKP, University of Stuttgart, have performed a life-cycle assessment (LCA) of the environmental impacts of lead-free and tin-lead solder, as used in electronic products.
For bar solders, when only lead-free solders were considered, the tin/copper alternative had the lowest (best) scores.
For paste solders, bismuth/tin/silver had the lowest impact scores among the lead-free alternatives in every category except non-renewable resource consumption.
For both paste and bar solders, all of the lead-free solder alternatives had a lower (better) LCA score in toxicity categories than tin/lead solder. This is primarily due to the toxicity of lead, and the amount of lead that leaches from printed wiring board assemblies.
The Association connecting the electronics industry performed a research on the performance of tin/silver/copper solders (SAC). They found no statistically significant difference with Lead based solder on
• Assembly performance screening to compare alloys
• Down selection of the solder pastes for assembly:
• Assembly of test vehicles using SAC alloys with SnPb eutectic solder as a control
• Baseline metallographic analysis of the assembled test vehicles
• Thermal cycling testing
• Metallographic analysis as a function of thermal cycling
Due to lower cost and equivalent performance, the 96.5/3.0/0.5 SAC alloy be the lead free solder paste of their choice

Designer: na
Manufacturer: na
Category: Solder material toxidity
Websites: www.ipc.org/3.0_Industry/3.5_Councils_Associations/3.5.1_Industry_Assoc/spvc_bro/SVPC_Final_ExecSumm.pdf

Images

E6121530-6d39-012d-4490-40405940767a
Solder
E6121530-6d39-012d-4490-40405940767a
Solder
Picture by tublab.com

Comments by our Users

Be the first to write a comment for this item.

Welcome

@ D4S, a platform by designers for designers, sharing ideas and knowledge on sustainable design
Learn more |  Leave Feedback
We are not-for-profit and want a trustworthy, independent site without advertisements.


If you like to use D4S please donate to enable us to pay hosting fees and extend the site. Thank you for your support!
Join us on LinkedIn